provide grid points file for auto leveling instead of using the GUI to Create the grid

[muhammadelmogy]

I want to be able to change the grid points of the auto leveling feature because I want to avoid vias while probing so I want to be able to provide a file which have the right location for the grid points which were previously modified to avoid the location of the vias on the PCB

How to do this? or is there a way to provide a drilling coordination to avoid while probing for auto leveling?

[massiveradiation]

There is not a way to do this but if your NC file has the bias (not sure what that means, but I'm assuming holes) you can open up auto level and see the grid in yellow. If the grid crossings land in a screw hole, simple adjust the number of probes. Not perfect, but it may work for you.

…

On Sat, Apr 12, 2025, 04:31 muhammad nour elmogy ***@***.***> wrote: I want to be able to change the grid points of the auto leveling feature because I want to avoid vias while probing so I want to be able to provide a file which have the right location for the grid points which were previously modified to avoid the location of the vias on the PCB How to do this? or is there a way to provide a drilling coordination to avoid while probing for auto leveling? — Reply to this email directly, view it on GitHub <#1933>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AGUKYUWDQGEGHQ2S7KFWGYL2ZDFNBAVCNFSM6AAAAAB27YKRQSVHI2DSMVQWIX3LMV43ERDJONRXK43TNFXW4OZYGE4TINBYGQ> . You are receiving this because you are subscribed to this thread.Message ID: ***@***.***>

[muhammadelmogy]

@massiveradiation
That would be ok if you have a couple of holes or vias in your pcb but when you have more than 50 vias in your design that would be very difficult.
This feature "avoiding drill location while making height map" is really very important and could be very easily done but I am not a python guy and I do not have enough time to do it! I have already implemented it some were years ago for other software

[muhammadelmogy]

@Engineer2Designer
what do you mean?

[Engineer2Designer]

@Engineer2Designer 你是什​​麼意思？

Finger misoperation. Sorry!