TP-Link H110 wont initalize in v3.4.0 or v3.5.0 works rolling back to v3.3.0

[andrewpym]

Core: 2026.3.2
Supervisor: 2026.03.0
Operating System: 17.1
Frontend: 20260312.0

Using HACS i downloaded 3.3.0 and setup the Tapo H110 without issue.

Once i updated to 3.4.0, the Tapo H110 flicks between initializing and working every half second, resulting in nothing attached to it working.

Rolling back to 3.3.0 and all works perfectly.

Tell me what logs are required and ill do my best to provide.

[XxKrustyxX]

Also having issue with the H110, I can discover the device (all my tapo devices actually) but it will "fail to connect" on both 3.3.0 and 3.4.0. Can add other devices like smart bulbs with no isue

[Echelon32]

For me also, like andrewpym described, H110 will not initialize since updating to 3.4.0.
Tried disabling and re-enabling third party support in the tapo app, but it changed nothing.

[andrewpym]

Same issue in v3.5.0

[XxKrustyxX]

Also having issue with the H110, I can discover the device (all my tapo devices actually) but it will "fail to connect" on both 3.3.0 and 3.4.0. Can add other devices like smart bulbs with no issue

Saw that it had updated overnight, quickly tried this morning before leaving for work, can now add the the H110 and HA appears to see all the sensors, will test later if I can actually use it as intended.

[XxKrustyxX]

Having played around with it now alot more entities are exposed but unfortunately still can't teach any IR commands to home assistant. Developer tool don't see the IR sensor.

[Frawaba]

I have Version: 3.5.0 and the TP-Link H110 device remains stuck on initialization in progress.
Tried setting static local IP address, restarting router and hub, but nothing.

[thetestspecimen]

Same problem (version 3.5.0) --> constant initializing with H110 hub.

If it is any help, I also have a H100 hub which has no problem in regard to adding the device.

[github-actions]

This issue is stale because it has been open for 30 days with no activity.

[jay6867]

Just found this now and am still seeing the issue in 3.5 so assuming we should still just roll back to 3.3 for now? also random note that the H110 connects to matter/smart things but a lot of things are not exposed like dimmers and learned IR remotes...

[Echelon32]

Still broken on ver.2026.5.4

[jay6867]

also would be sweet if they displayed the APIs for IR remotes you created....its matter supported and the only thing you can do is turn it on and off?

[TheSamDickey]

also would be sweet if they displayed the APIs for IR remotes you created....its matter supported and the only thing you can do is turn it on and off?

This is my perspective as well. I was so excited after adding my remotes in the Tapo app to be able to control all the IR buttons via HA... then after successfully adding it over Matter seeing only on/off is so disappointing. It's so close to doing what I want!