MARS TPX3 Data Reduction Workflow

Beamline: MARS (HFIR) Detector: Timepix3 (TPX3) Beam Type: Continuous (no TOF) Applications: nR (radiography), nCT (computed tomography), nGI (grating interferometry)

Pipeline Flowchart

flowchart TD
    subgraph Input["1. Event Loading"]
        A1[HDF5 Events] --> A[Load Sample Events]
        A2[HDF5 Events] --> B[Load OB Events]
    end

    subgraph EventConv["2. Event Conversion"]
        EC[Bin Events by x,y]
        EH[2D Histogram]
    end

    subgraph RunCombine["3. Run Combining"]
        RC1{Multiple Runs?}
        RC2[Average Histograms]
        RC3[Single Run]
    end

    subgraph ROI["4. ROI Clipping"]
        D{ROI Specified?}
        E[Apply ROI]
        F[Full Frame]
    end

    subgraph PixelDetect["5-6. Pixel Detection"]
        PD1[Dead Pixel Detection]
        PD2[Hot Pixel Detection]
        PM1[Dead Mask]
        PM2[Hot Mask]
        PM3[Combined Bad Pixel Mask]
    end

    subgraph Gamma["7. Gamma Filtering"]
        GF[Detect Gamma Spikes]
        GR[Replace with Median]
    end

    subgraph Norm["8. Normalization"]
        N["T = Sample / OB"]
    end

    subgraph UQ["9. Experiment Error"]
        UQ1[Poisson Statistics]
        UQ2[Error Propagation]
    end

    subgraph Output["10. Output"]
        O1[Transmission 3D]
        O2[Uncertainty 3D]
        O3[Dead Pixel Mask]
        O4[Hot Pixel Mask]
        O5[Metadata]
    end

    Input --> EC
    EC --> EH
    EH --> RC1
    RC1 -->|Yes| RC2
    RC1 -->|No| RC3
    RC2 --> D
    RC3 --> D
    D -->|Yes| E
    D -->|No| F
    E --> PD1
    F --> PD1
    PD1 --> PM1
    PD1 --> PD2
    PD2 --> PM2
    PM1 --> PM3
    PM2 --> PM3
    PM3 --> Gamma
    GF --> GR
    Gamma --> N
    N --> UQ1
    UQ1 --> UQ2
    UQ2 --> O1
    UQ2 --> O2
    PM1 --> O3
    PM2 --> O4
    O1 --> O5
    O2 --> O5
    O3 --> O5
    O4 --> O5

    style Input fill:#e1f5ff
    style EventConv fill:#ffe1f5
    style RunCombine fill:#f5e1ff
    style ROI fill:#fff4e1
    style PixelDetect fill:#ffe1e1
    style Gamma fill:#ffe1cc
    style Norm fill:#e1ffe1
    style UQ fill:#ffe1cc
    style Output fill:#f5e1ff

1. Inputs

Input	Format	Required	Description
Sample events	Event files (HDF5)	Yes	Neutron events (x, y, ToT)
Open Beam events	Event files (HDF5)	Yes	Reference events without sample
ROI	(x0, y0, x1, y1)	No	Region of interest to crop

Metadata (from files):

Acquisition time
Total event count

Key Differences from CCD/CMOS:

No dark current correction (counting detector - no electronic baseline)
Event data → histogram conversion required
Hot pixel detection required (radiation damage causes false counts)

2. Processing Pipeline

┌─────────────────────────────────────────────────────────────────┐
│  STEP 1: Load Event Data                                        │
│  ───────────────────────                                        │
│  • Load Sample event files → event list (x, y, ToT)             │
│  • Load OB event files → event list (x, y, ToT)                 │
│  • Extract acquisition metadata                                 │
│                                                                 │
│  Note: TPX3 events include ToT (Time over Threshold) which      │
│  correlates with deposited energy. At MARS, TOF not used.       │
└─────────────────────────────────────────────────────────────────┘
                              ↓
┌─────────────────────────────────────────────────────────────────┐
│  STEP 2: Event-to-Histogram Conversion                          │
│  ─────────────────────────────────────                          │
│  Convert event lists to 2D histograms (no TOF at MARS):         │
│                                                                 │
│  FOR each acquisition:                                          │
│    • Bin events by (x, y) position                              │
│    • Sample_hist[i] = histogram(events_sample, bins=(x, y))     │
│    • Result: 2D count image per acquisition                     │
│                                                                 │
│  OB_hist = histogram(events_OB, bins=(x, y))                    │
│                                                                 │
│  Output: Sample and OB each stacked 3D (N_image, x, y);         │
│  OB reduced to (x, y) later by reference preparation            │
└─────────────────────────────────────────────────────────────────┘
                              ↓
┌─────────────────────────────────────────────────────────────────┐
│  STEP 3: Run Combining (Optional)                               │
│  ────────────────────────────────                               │
│  IF multiple runs provided:                                     │
│    • Average histograms across runs (sum ÷ run count)           │
│    • No metadata aggregation (metadata_keys_to_sum=[])          │
│    • Bad pixels detected once on the combined stack             │
└─────────────────────────────────────────────────────────────────┘
                              ↓
┌─────────────────────────────────────────────────────────────────┐
│  STEP 4: ROI Clipping (Optional)                                │
│  ───────────────────────────────                                │
│  IF ROI specified:                                              │
│    • Crop all histogram arrays to ROI                           │
└─────────────────────────────────────────────────────────────────┘
                              ↓
┌─────────────────────────────────────────────────────────────────┐
│  STEP 5: Dead Pixel Detection                                   │
│  ────────────────────────────                                   │
│  • Identify pixels with zero summed counts in the SAMPLE        │
│  • dead_mask = (Sample_summed == 0)  (sum over N_image)         │
│  • Output: 2D boolean mask                                      │
└─────────────────────────────────────────────────────────────────┘
                              ↓
┌─────────────────────────────────────────────────────────────────┐
│  STEP 6: Hot Pixel Detection                                    │
│  ───────────────────────────                                    │
│  TPX3-specific: radiation damage causes false counts            │
│                                                                 │
│  Detection methods:                                             │
│    a) Statistical: pixels with anomalously high count rate      │
│       on the SAMPLE, via a MAD threshold (default sigma=5.0):    │
│       hot_mask = (Sample_summed > median + sigma×MAD×1.4826)     │
│    b) Temporal: inconsistent counts across acquisitions         │
│    c) ToT-based: events with abnormal ToT values                │
│                                                                 │
│  Output: 2D boolean hot_pixel_mask                              │
│                                                                 │
│  Combined mask: bad_pixels = dead_mask | hot_mask               │
└─────────────────────────────────────────────────────────────────┘
                              ↓
┌─────────────────────────────────────────────────────────────────┐
│  STEP 7: Gamma Filtering                                        │
│  ───────────────────────                                        │
│  CRITICAL for MARS (SANS beamline contamination)                │
│                                                                 │
│  FOR each histogram image:                                      │
│    • Detect gamma spikes (outliers > threshold)                 │
│    • Replace with local median (3x3 neighborhood)               │
│                                                                 │
│  Note: Gamma events may have distinct ToT signature -           │
│  could filter at event level before histogramming               │
│                                                                 │
│  Methods:                                                       │
│    a) Histogram-based: same as CCD/CMOS                         │
│    b) Event-level: filter by ToT before histogramming           │
└─────────────────────────────────────────────────────────────────┘
                              ↓
┌─────────────────────────────────────────────────────────────────┐
│  STEP 8: Normalization                                          │
│  ─────────────────────                                          │
│  FOR each image i:                                              │
│                                                                 │
│    T[i] = Sample_hist[i] / OB_hist                              │
│                                                                 │
│  Handle division:                                               │
│    • Bad pixels carried as scipp masks (not NaN-filled)         │
│    • Where OB_hist == 0: T = inf/nan (division artifact)        │
│                                                                 │
│  Formula (no dark current subtraction):                         │
│    T = I_sample / I_OB                                          │
└─────────────────────────────────────────────────────────────────┘
                              ↓
┌─────────────────────────────────────────────────────────────────┐
│  STEP 9: Experiment Error Propagation                           │
│  ────────────────────────────────────                           │
│  Poisson statistics for counting detector:                      │
│    σ_sample = √(N_sample)                                       │
│    σ_OB = √(N_OB)                                               │
│                                                                 │
│  Error propagation for division:                                │
│                                                                 │
│    σ_T = T × √[ 1/N_sample + 1/N_OB ]                           │
│                                                                 │
│  Simplified (no dark current term):                             │
│    σ_T/T = √[ (σ_S/S)² + (σ_OB/OB)² ]                           │
│          = √[ 1/N_S + 1/N_OB ]                                  │
└─────────────────────────────────────────────────────────────────┘
                              ↓
┌─────────────────────────────────────────────────────────────────┐
│  STEP 10: Output                                                │
│  ────────────                                                   │
│  • Transmission: 3D array (N_image, x, y) for HDF5;             │
│    TIFF renames N_image → z                                     │
│  • Experiment Error: 3D array (same shape as Transmission)      │
│  • Dead Pixel Mask: 2D boolean array (x, y)                     │
│  • Hot Pixel Mask: 2D boolean array (x, y)                      │
│  • Metadata: processing parameters, provenance                  │
└─────────────────────────────────────────────────────────────────┘

3. Output Specification

Output	Dimensions	dtype	Description
Transmission	(N_image, x, y)	float32	Normalized transmission values
Experiment Error	(N_image, x, y)	float32	Propagated uncertainty (1σ)
Dead Pixel Mask	(x, y)	bool	True = dead pixel
Hot Pixel Mask	(x, y)	bool	True = hot pixel (TPX3-specific)
Metadata	dict	-	Processing provenance

Metadata contents:

Input file paths
Processing timestamp
Event-to-histogram binning parameters
Gamma filter parameters used
Hot pixel detection parameters
ROI applied (if any)
Number of runs combined (if any)
Software version

4. Decision Points

Step	Decision	Options
2	Event binning resolution	Native detector / Custom
3	Multiple runs?	Combine or single run
4	ROI needed?	Apply crop or full frame
6	Hot pixel method	Statistical / Temporal / ToT-based
7	Gamma filter level	Event-level / Histogram-level / Both

5. Development Components

Required Modules

Component	Purpose	Priority
`loaders.event_loader`	Load TPX3 event files	P0
`tof.event_converter`	Convert events to histogram	P0
`processing.run_combiner`	Aggregate multiple runs	P1
`processing.roi_clipper`	Apply ROI to arrays	P1
`tof.pixel_detector`	Identify dead pixels	P0
`tof.pixel_detector`	Identify hot pixels (TPX3)	P0
`filters.gamma_filter`	Remove gamma contamination	P0
`processing.normalizer`	Compute transmission	P0
`processing.uncertainty_calculator`	Error propagation	P0
`exporters.hdf5_writer` / `exporters.tiff_writer`	Write results (HDF5 primary; TIFF optional)	P0

Data Models

EventData:
  - x: NDArray[uint16]       # pixel x coordinate
  - y: NDArray[uint16]       # pixel y coordinate
  - tot: NDArray[uint16]     # Time over Threshold
  - metadata: Dict           # acquisition info

InputData:
  - sample_events: List[EventData]  # per acquisition
  - ob_events: EventData
  - roi: Optional[Tuple[int, int, int, int]]
  - metadata: Dict

ProcessedData:
  - transmission: NDArray[float32]  # (N, y, x)
  - uncertainty: NDArray[float32]   # (N, y, x)
  - dead_pixel_mask: NDArray[bool]  # (y, x)
  - hot_pixel_mask: NDArray[bool]   # (y, x)
  - metadata: Dict

6. Key Differences from MARS CCD/CMOS

Aspect	CCD/CMOS	TPX3
Input format	TIFF/FITS stacks	Event files
Dark current	Required	Not needed
Hot pixels	Not applicable	Required detection
Gamma filter	Histogram only	Event or histogram level
Error formula	Includes dark term	Simpler (no dark)
Data conversion	None	Event → histogram

7. Validation Criteria

Event-to-histogram conversion preserves total counts
Transmission values in expected range
inf/nan only at zero-denominator (OB) pixels; masks are preserved, not value-filled
Uncertainty > 0 for all valid pixels
Hot pixel mask identifies anomalous count pixels
Dead pixel mask identifies zero-count pixels
Gamma filtering removes spikes without affecting valid data

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Uh oh!

MARS TPX3 Data Reduction Workflow

Pipeline Flowchart

1. Inputs

2. Processing Pipeline

3. Output Specification

4. Decision Points

5. Development Components

Required Modules

Data Models

6. Key Differences from MARS CCD/CMOS

7. Validation Criteria

Uh oh!

FilesExpand file tree

mars_tpx3.md

Latest commit

History

mars_tpx3.md

File metadata and controls

MARS TPX3 Data Reduction Workflow

Pipeline Flowchart

1. Inputs

2. Processing Pipeline

3. Output Specification

4. Decision Points

5. Development Components

Required Modules

Data Models

6. Key Differences from MARS CCD/CMOS

7. Validation Criteria