Orcaslicer crashes with included profiles

[spinjet]

I've been trying using Orcaslicer with the profiles from the repo... but it crashes the program every time I try to slice.
I noticed it crashes at the generating supports step.

I am using Orca 2.3.0. I tried different types of STLs, but they all crash, including even a simple cube.

[bassamanator]

Are you previously an OS user? Can you slice the same models using any other profile, prusa m4, for example?

[spinjet]

Yes, I have used OS for a while, but I mainly use PS.
I tried with the Prusa M4 profile, and I don't get any issue with any support type.
I have though isolated the problem, it seems it's something with the organic supports. Using snug/grid supports doesn't cause the program to crash. Using tree supports with the Organic setting causes the program to crash.

The error I do get sometimes is "divide by zero".
Maybe it's somewhere in the tree support settings?

[bassamanator]

I see no properties set to 0 under tree settings. I guess you can try to play with the 0s in the following list to see if it makes a difference:

You can also the related open bugs with OS here.

Let me know how it goes.

[bassamanator]

Might also be worth checking out a nightly build here.

[spinjet]

Hi Bassam!
I checked my settings, and somehow I had Support/objects xy distance set to 0.
I changed it to 0.3 mm and that fixed it, thank you so much!

[bassamanator]

It seems that the 0.6 profiles had this issue. All fixed, and pushed.

Thanks for bringing this issue!